YOUR SOURCE FOR SOLIDWORKS 3D CAD ENGINEERING SOFTWARE

What’s New SOLIDWORKS 2019: Hole Wizard – Specifying Tolerances

This image has an empty alt attribute; its file name is whatsnew2019header.jpg

Written by: Mark Downey, Application Engineer

An enhancement to the Hole Wizard In SOLIDWORKS 2019 is the ability to specify different tolerances for each aspect of the hole wizard feature in the Hole Wizard property manager.  Previously, this had to be done manually in the drawing.

Now this can be entered into the part so that it automatically populates the hole call-out in the drawings.  To specify the tolerances in the Hole Wizard property manager, locate the Tolerance/Precision section at the bottom of the Hole Specification as shown below.

This image has an empty alt attribute; its file name is 1-1.png

In the Tolerance/Precision section, select the drop down for the Call-out value that needs to be defined.

This image has an empty alt attribute; its file name is 2-1.png

Then set up the Tolerance Type and corresponding values as needed.

This image has an empty alt attribute; its file name is 3-1.png
This image has an empty alt attribute; its file name is 4-1.png
The resulting hole call-out in the drawing will reflect the settings in the part.
This image has an empty alt attribute; its file name is 5-1.png
This entry was posted in New Features, SOLIDWORKS 2019 and tagged , , , , , . Bookmark the permalink.

One Response to What’s New SOLIDWORKS 2019: Hole Wizard – Specifying Tolerances

  1. Glenn Novack says:

    awesome upgrade
    keep blogs coming

Leave a Reply

Your email address will not be published.